Description
8mm 2-pin COB connectors are workable to Both IP20 and IP65/IP54 available including strip-to-wire and strip-to-strip-joint types . And patent IDC terminal design makes splicing such easy and convenient to both strip-to-wire and strip-to-strip application. The workable LED density is from 30LEDs to 90LEDs per meter.
- Allow user to attach 2 conductor flat wire according project requirement (Wire Color, Cross Section, length,etc)
- Support big current
- Good for high density light LED strip,don’t mask light of first LED.
- Gripping LED strip very reliably
How to use 2 pin 8mm COB connectors
8mm 2-Pin COB LED Strip Light Corner Connector
8mm 2-Pin COB LED Strip Light Corner Connector
8mm 2-Pin COB LED Strip Light Corner Connector
8mm 2-Pin COB LED Strip Light Corner Connector
8mm 2-Pin COB LED Strip Light Corner Connector
Note: above operation is about non-waterproof version, waterproof types are such similar.
- LED Types: COB ,8MM
- LED Quantity Supported: 30~90 LEDs/Meter
All LED strip listed above are with 2 soldering pads on 8mm wide FPCB
Technical Data
| Item Name | 2 pin 5mm for COB Strips lights |
|---|
| Item NO. | BL-TC8XBL-2 | | | |
| Strip Protection | IP20 COB | | | |
| Type | Strip to wire | |
| Workable Wire Gauge | 22 AWG | / |
| Workable Wire Cross Sectional Area | 0.34 mm² | / |
| Workable Wire OD | Max 2.1 mm | / |
| Pin Pitch | 2.4mm |
| Way of Contact | insulation-piercing contact |
| Working Voltage | DC3V~24V |
| Rated Current | 5A |
| Polarity QTY | 3 |
| Housing Color (cap/base) | Transparent |
| Min.LED Strip Thickness | >0.2mm |
| Housing Material | PC |
| Pin Material | Phosphor Copper (Cu) |
| Flame Retardant Level | UL94v-0 |
Remark: The data above are tested under 25℃.
If you have no idea, click >>
How to choose a led strip connector for a RGB/RGBW led light strip?
Learn More About 2pin 8mm COB Connectors
DIY Strip to Wire Quick Connection Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
Q:Do these connectors work with 24V system?
A: It would be ok for the connector to work with 24V system.
Q: Which type of light strip is suitable for?
A: 8mm width single color strip lights with 2 Soldering Pads. both IP20 non-waterproof light strips
Q: How should I connect the light strip?
A: You can pierce the strip light from the front. For IP20 strip, it is recommended to pierce from the front of the light strip.
Q: If I accidentally cover the connector, how can I open it?
A: You can pry it open with a suitable screwdriver.
Reviews
There are no reviews yet.