- Flexible Connection Options: One connector, multiple connection form. Achieve strip-to-strip and strip-to-wire connections in L-shaped, T-shaped, X-shaped, and straight shapes. This versatile design adapts to various lighting layout needs.
- Convenient Installation – Simply align the metal prongs with the solder pads on the 8mm wide, 2-pin COB LED strip light and compress the pins using pliers to pierce through the strip, establishing a secure, solderless connection.
- Strict Compatibility – Exclusively compatible with standard 22 awg 20awg wires and 8mm wide, 2-pin COB or standard SMD LED strip lights. Incompatible with 3mm/5mm/10mm/12mm LED strips, 3-pin/4-pin/5-pin/6-pin COB LED strips, or SMD 2835/5050 RGB LED strips.
- Single-Use Design – These corner connectors utilize a pierce-through mechanism to establish electrical conductivity. Once compressed, they cannot be reopened. Therefore, when pressing the pins, ensure proper alignment with the solder pads on the light strip and carefully verify the polarity consistency between the connected segments.
Features
- Allow user to attach 2 conductor flat wire according project requirement (Wire Color, Cross Section, length,etc)
- Support big current
- Good for high density light LED strip,don’t mask light of first LED.
- Gripping LED strip very reliably
How to use 2 pin 10mm COB connectors
LED Strip Connector 10mm 2-Pin
LED Strip Connector 10mm 2-Pin
LED Strip Connector 10mm 2-Pin
LED Strip Connector 10mm 2-Pin
LED Strip Connector 10mm 2-Pin
Note: above operation is about non-waterproof version, waterproof types are such similar.
Workable LED Strip
- LED Types: COB ,10MM
- LED Quantity Supported: 30~90 LEDs/Meter
All LED strip listed above are with 2 soldering pads on 10mm wide FPCB
Technical Data
| Item Name | 2 pin 8mm for COB Strips lights | |||
|---|---|---|---|---|
| Item NO. | BL-X08-2P | BL-X05-2P | BL-X10-2P | |
| Strip Protection | IP20 COB | IP20 COB | IP20 COB | |
| Type | Strip to wire | Strip to strip joint | ||
| Workable Wire Gauge | 22 AWG | / | ||
| Workable Wire Cross Sectional Area | 0.34 mm² | / | ||
| Workable Wire OD | Max 2.1 mm | / | ||
| Pin Pitch | 2.4mm | |||
| Way of Contact | insulation-piercing contact | |||
| Working Voltage | DC3V~24V | |||
| Rated Current | 5A | |||
| Polarity QTY | 3 | |||
| Housing Color (cap/base) | Transparent | |||
| Min.LED Strip Thickness | >0.2mm | |||
| Housing Material | PC | |||
| Pin Material | Phosphor Copper (Cu) | |||
| Flame Retardant Level | UL94v-0 | |||
Remark: The data above are tested under 25℃.
If you have no idea, click >>
How to choose a led strip connector for a RGB/RGBW led light strip?
Reviews
There are no reviews yet.