Skip to content
-
- One end for RGB extension wire and another end for RGB Non-waterproof strip light. Connect to wire without stripping insulation (insulation-piercing-contact)
- DIY RGB connector wire with length you want, no more worry distance from strip light to Controller or power supply
- As much as 5A ( R,G,B 3 channel ) supported, allow you to connect longer LED strip by one connector.
- Strip light end can work with 10mm wide SMD5050 rgb strip light non-waterproof (Below 96LEDs/Meter), wire end can work with 4 conductor wire ranging 22~20AWG/0.34~0.54 mm2
- Clear cap design will allow light to go through, will not leave dark area at your lighting space.
-
- This LED Strip Connector Suitable for 2 pin 8mm 3528 STANDARD WATERPROOF led lights(PU surface,not Silicone surface), One end for 2 core extension wire and another end for waterproof single color led strip
- Connect led strip to wire: Can DIY custom wiring, without stripping wire, no soldering,Compatible with 20-18awg 2 conductor wire, solid wire or stranded wire, Use these with the 2 core extension wire to get lighting exactly where you want it
- No need stripping waterproof coating of led strip before connection , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
- Firmly bite through the strip, don’t like traditional connector only conductive connection, it is a solid connection and much stronger
- If your led strip are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls use this item AC-SE-N8XB-2
-
- One end for strip light and another end for extension wire (22,20,and 18 AWG), easily DIY lead connector wire or strip-to-strip-bridge (jumper) with any length.No need stripping wire insulation before connection (pierce-to-contact), easily connect your led strip to power or dimmer without any soldering, just a pliers needed
- Widely applicable for IP20 Non-waterproof tape light like 10mm SMD5050 /5630 /2835 /5730 in different LED density ranging 30~90 LEDs per meter
- Clear Cap that will not mask light of first SMD thus hardly see dark area in your lighting space. Make lighting effect more uniform
- Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work
- The pin will go through PCB from BACK of strip, which can grip strip light tightly and wire-end blade go through insulation to contact conductor inside cable, you never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape
-
- One end for strip light and another end for extension wire, DIY a lead connector wire with any length.Applicable for IP65/IP54 strip light (3 solder pad) in different LED density ranging 30~120 LEDs per meter.
- No need stripping wire insulation nor waterproof coating of strip light before connection (pierce-to-contact) , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
- Clear Cap that will not mask light of first LED thus hardly see dark area in your lighting space. Make lighting effect more uniform.
- Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work.
- With help of innovative inner-arc cap to fit strip light coating surface and piercing contact design, connector can grip strip light tightly,never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape.
-
- One end for strip light and another end for wire,easily DIY a lead connector wire with any length.Widly applicable for SMD5050 / SMD5630 / SMD2835 / SMD5730 strip light in different LED density ranging 30~90 LEDs per meter.Workable to strip light with 3M VHB red adhesive tape.
- Clear Cap that will not mask light of first LED. Will not leave dark area in your lighting space, making your lighting effect uniform
- As much as 5A current supported, allow you to connect longer LED strip by one connector.
- No need stripping wire insulation before connection (pierce-to-contact), really allow user to insert & press to connect with a 'CLICK'sound. Connect your led strip to power or dimmer without any soldering, just a pliers needed.
- Innovative fixing bar and piercing contact design will grip strip light tightly,never worry strip light or wire moving out of connector.
-
- One end for strip light and another end for extension wire, DIY a lead connector wire with any length.Applicable for IP20 strip light (3 solder pad) in different LED density ranging 30~120 LEDs per meter.
- No need stripping wire insulation before connection (pierce-to-contact) , easily connect your led strip to cable, power, dimmer or controller without any soldering.
- Clear Cap that will not mask light of first LED thus hardly see dark area in your lighting space. Make lighting effect more uniform.
- Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work.
- With fixing bar on cap and piercing contact design, connector can grip strip light tightly,never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape.
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless t tap connectors are innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless t tap connectors are innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless t tap connectors are innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless t tap connectors are innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless t tap connectors are innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
Page load link