- One end for strip light and another end for wire,easily DIY a lead connector wire with any length.Widly applicable for SMD5050 / SMD5630 / SMD2835 / SMD5730 strip light in different LED density ranging 30~90 LEDs per meter.Workable to strip light with 3M VHB red adhesive tape.
- Clear Cap that will not mask light of first LED. Will not leave dark area in your lighting space, making your lighting effect uniform
- As much as 5A current supported, allow you to connect longer LED strip by one connector.
- No need stripping wire insulation before connection (pierce-to-contact), really allow user to insert & press to connect with a 'CLICK'sound. Connect your led strip to power or dimmer without any soldering, just a pliers needed.
- Innovative fixing bar and piercing contact design will grip strip light tightly,never worry strip light or wire moving out of connector.
-
-
- One end for strip light and another end for extension wire (22,20,and 18 AWG), easily DIY lead connector wire or strip-to-strip-bridge (jumper) with any length.No need stripping wire insulation before connection (pierce-to-contact), easily connect your led strip to power or dimmer without any soldering, just a pliers needed
- Widely applicable for IP20 Non-waterproof tape light like 10mm SMD5050 /5630 /2835 /5730 in different LED density ranging 30~90 LEDs per meter
- Clear Cap that will not mask light of first SMD thus hardly see dark area in your lighting space. Make lighting effect more uniform
- Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work
- The pin will go through PCB from BACK of strip, which can grip strip light tightly and wire-end blade go through insulation to contact conductor inside cable, you never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape
-
- This LED Strip Connector Suitable for 2 pin 5mm 3528 STANDARD NON-WATERPROOF led lights(PU surface,not Silicone surface), One end for 2 core extension wire and another end for waterproof single color led strip
- Connect led strip to wire: Can DIY custom wiring, without stripping wire, no soldering,Compatible with 20-18awg 2 conductor wire, solid wire or stranded wire, Use these with the 2 core extension wire to get lighting exactly where you want it
- No need stripping waterproof coating of led strip before connection , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
- Firmly bite through the strip, don’t like traditional connector only conductive connection, it is a solid connection and much stronger
- If your led strip are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls use this item AC-SE-N5XB-2
-
- This LED Strip Connector Suitable for 2 pin 8mm 3528 STANDARD WATERPROOF led lights(PU surface,not Silicone surface), One end for 2 core extension wire and another end for waterproof single color led strip
- Connect led strip to wire: Can DIY custom wiring, without stripping wire, no soldering,Compatible with 20-18awg 2 conductor wire, solid wire or stranded wire, Use these with the 2 core extension wire to get lighting exactly where you want it
- No need stripping waterproof coating of led strip before connection , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
- Firmly bite through the strip, don’t like traditional connector only conductive connection, it is a solid connection and much stronger
- If your led strip are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls use this item AC-SE-N8XB-2
-
- This LED Strip Connector Suitable for 2 pin 8mm 3528 STANDARD WATERPROOF led lights(PU surface,not Silicone surface), One end for 2 core extension wire and another end for waterproof single color led strip
- Connect led strip to wire: Can DIY custom wiring, without stripping wire, no soldering,Compatible with 20-18awg 2 conductor wire, solid wire or stranded wire, Use these with the 2 core extension wire to get lighting exactly where you want it
- No need stripping waterproof coating of led strip before connection , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
- Firmly bite through the strip, don’t like traditional connector only conductive connection, it is a solid connection and much stronger
- If your led strip are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls use this item AC-SE-N8XB-2
-
- QUICK AND FLEXIBLE CONNECTION: Connect COB High Density Light strips to wire without stripping insulation, no soldering. The Alightings 2pin led light connectors are suitable for 5mm COB LED strip lights, One end connects 2-conductor 22 gauge extension cable and another end for cob led strip. The led tape light connectors can not work with 10mm led strips, 3528 rgb led strip, or 20 awg wire.
- FREE FROM THE LIMIT OF TERMINAL POSITION: Connect wire by yourself as need, use these COB 2pin led connectors with 22 gauge 2 conductor extension cable to get lighting exactly where you want it. No mater board to wire input or strip to strip jumper, extension distance and angle are no more problems to you.
- STRONG COMPATABILITY: The led strip connector compatible with 5v, 12v, 24v led light strips, work for IP20 5mm width 3528 2 Soldering Pads tape light. You only need to align the front side (led surface) of the light strip with the pins of the connector, and then buckle the transparent cover to achieve a stable and good connection. Suit for 22 awg 2 conductor wire, solid wire and multi-core wire.
-
- QUICK AND FLEXIBLE CONNECTION: Connect COB High Density Light strips to wire without stripping insulation, no soldering. The Alightings 2pin led light connectors are suitable for 8mm COB LED strip lights, One end connects 2-conductor 22 gauge extension cable and another end for cob led strip. The led tape light connectors can not work with 10mm led strips, 3528 rgb led strip, or 20 awg wire.
- FREE FROM THE LIMIT OF TERMINAL POSITION: Connect wire by yourself as need, use these COB 2pin led connectors with 22 gauge 2 conductor extension cable to get lighting exactly where you want it. No mater board to wire input or strip to strip jumper, extension distance and angle are no more problems to you.
- STRONG COMPATABILITY: The led strip connector compatible with 5v, 12v, 24v led light strips, work for IP20 8mm width 3528 2 Soldering Pads tape light. You only need to align the front side (led surface) of the light strip with the pins of the connector, and then buckle the transparent cover to achieve a stable and good connection. Suit for 22 awg 2 conductor wire, solid wire and multi-core wire.
-
- QUICK AND FLEXIBLE CONNECTION: Connect COB High Density Light strips to wire without stripping insulation, no soldering. The Alightings 2pin led light connectors are suitable for 8mm COB LED strip lights, One end connects 2-conductor 22 gauge extension cable and another end for cob led strip. The led tape light connectors can not work with 10mm led strips, 3528 rgb led strip, or 20 awg wire.
- FREE FROM THE LIMIT OF TERMINAL POSITION: Connect wire by yourself as need, use these COB 2pin led connectors with 22 gauge 2 conductor extension cable to get lighting exactly where you want it. No mater board to wire input or strip to strip jumper, extension distance and angle are no more problems to you.
- STRONG COMPATABILITY: The led strip connector compatible with 5v, 12v, 24v led light strips, work for IP20 8mm width 3528 2 Soldering Pads tape light. You only need to align the front side (led surface) of the light strip with the pins of the connector, and then buckle the transparent cover to achieve a stable and good connection. Suit for 22 awg 2 conductor wire, solid wire and multi-core wire.
-
- QUICK AND FLEXIBLE CONNECTION: Connect COB High Density Light strips to wire without stripping insulation, no soldering. The Alightings 2pin led light connectors are suitable for 5mm COB LED strip lights, One end connects 2-conductor 22 gauge extension cable and another end for cob led strip. The led tape light connectors can not work with 10mm led strips, 3528 rgb led strip, or 20 awg wire.
- FREE FROM THE LIMIT OF TERMINAL POSITION: Connect wire by yourself as need, use these COB 2pin led connectors with 22 gauge 2 conductor extension cable to get lighting exactly where you want it. No mater board to wire input or strip to strip jumper, extension distance and angle are no more problems to you.
- STRONG COMPATABILITY: The led strip connector compatible with 5v, 12v, 24v led light strips, work for IP20 5mm width 3528 2 Soldering Pads tape light. You only need to align the front side (led surface) of the light strip with the pins of the connector, and then buckle the transparent cover to achieve a stable and good connection. Suit for 22 awg 2 conductor wire, solid wire and multi-core wire.
-
TRUE DOTLESS & GLARE-FREE GLOW: Unlike standard COB led strip light that show hotspots when dimmed, our Solid Silicone Diffusion Technology creates a completely seamless, liquid-like line of light. Engineered for visual comfort, it allows for safe movement at night without dazzling sensitive eyes. Optimized for premium under-cabinet toe-kicks and ambient hallway lighting. IP67 WATERPROOF SILICONE EXTRUSION: Encased in a durable 7mm x 5mm solid silicone sleeve, this strip is soft to the touch, UV-resistant, and non-yellowing. Designed to withstand moisture and dust in bathroom vanities or outdoor patio soffits. (Note: Cut ends and connections must be sealed with silicone sealant to maintain water resistance). CRI 90+ & 24V STABLE OUTPUT: Reveal the true, vibrant colors of granite countertops and retail displays with high color accuracy. The 24V DC design ensures consistent brightness across the full 16.4ft run, minimizing the voltage drop and dimming often found in standard 12V strips. CUTTABLE & DIY READY: The slim profile fits into narrow aluminum channels and curves around corners easily. Cuttable at marked intervals for a custom fit. Installation Note: Compatible with standard 2-pin connectors (sold separately) or soldering. Critical: For wet locations, you must apply waterproof sealant to all connections. -
TRUE DOTLESS & GLARE-FREE GLOW: Unlike standard COB LED strip Neon Rope Lightt that show hotspots when dimmed, our Solid Silicone Diffusion Technology creates a completely seamless, liquid-like line of light. Engineered for visual comfort, it allows for safe movement at night without dazzling sensitive eyes. Optimized for premium under-cabinet toe-kicks and ambient hallway lighting. IP67 WATERPROOF SILICONE EXTRUSION: Encased in a durable 7mm x 5mm solid silicone sleeve, this strip is soft to the touch, UV-resistant, and non-yellowing. Designed to withstand moisture and dust in bathroom vanities or outdoor patio soffits. (Note: Cut ends and connections must be sealed with silicone sealant to maintain water resistance). CRI 90+ & 24V STABLE OUTPUT: Reveal the true, vibrant colors of granite countertops and retail displays with high color accuracy. The 24V DC design ensures consistent brightness across the full 16.4ft run, minimizing the voltage drop and dimming often found in standard 12V strips. CUTTABLE & DIY READY: The slim profile fits into narrow aluminum channels and curves around corners easily. Cuttable at marked intervals for a custom fit. Installation Note: Compatible with standard 2-pin connectors (sold separately) or soldering. Critical: For wet locations, you must apply waterproof sealant to all connections. -
This is our most economical 2835 LED strip lights. It also uses less power than our other strips, so you save money on the strip, the power supplies and electricity. ● Very popular and made with high quality components. Available in several shades of white, red, green, blue and yellow. ● Use our top quality single-color flexible LED strip(strip lighting), Superflat LED rope or bars for accent lighting in coves, edge lit glass and a host of other applications. ● Dimming them is easy and inexpensive with our extensive line of 12- and 24-volt dimming drivers. Our dimming drivers can create a fully scalable solution that our customers have used to create larger installations in retail stores, resorts, sports bars and other locations. ● Or, choose a conventional non-dimming supply (driver) and enjoy state-of-the-art affordable LED accent lighting! -
This is our most economical 2835 LED strip lights. It also uses less power than our other strips, so you save money on the strip, the power supplies and electricity. ● Very popular and made with high quality components. Available in several shades of white, red, green, blue and yellow. ● Use our top quality single-color flexible LED strip(strip lighting), Superflat LED rope or bars for accent lighting in coves, edge lit glass and a host of other applications. ● Dimming them is easy and inexpensive with our extensive line of 12- and 24-volt dimming drivers. Our dimming drivers can create a fully scalable solution that our customers have used to create larger installations in retail stores, resorts, sports bars and other locations. ● Or, choose a conventional non-dimming supply (driver) and enjoy state-of-the-art affordable LED accent lighting! -
- One end for strip light and another end for extension wire, DIY a lead connector wire with any length.Applicable for IP20 strip light (3 solder pad) in different LED density ranging 30~120 LEDs per meter.
- No need stripping wire insulation before connection (pierce-to-contact) , easily connect your led strip to cable, power, dimmer or controller without any soldering.
- Clear Cap that will not mask light of first LED thus hardly see dark area in your lighting space. Make lighting effect more uniform.
- Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work.
- With fixing bar on cap and piercing contact design, connector can grip strip light tightly,never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape.
-
- One end for strip light and another end for extension wire, DIY a lead connector wire with any length.Applicable for IP65/IP54 strip light (3 solder pad) in different LED density ranging 30~120 LEDs per meter.
- No need stripping wire insulation nor waterproof coating of strip light before connection (pierce-to-contact) , easily connect your led strip to power, dimmer or controller without any soldering, just a pliers needed.
- Clear Cap that will not mask light of first LED thus hardly see dark area in your lighting space. Make lighting effect more uniform.
- Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work.
- With help of innovative inner-arc cap to fit strip light coating surface and piercing contact design, connector can grip strip light tightly,never worry strip light or wire moving out of connector. Even workable to strip light with 3M VHB red foam adhesive tape.